Ebara Self Priming Pump AGA-AGC

Ebara AGA-AGC Self Priming Pump

The Ebara AGA-AGC series of self priming pumps have a cast iron pump casing, an in-fluid shaft in AISI 303, and either a brass or reinforced fibreglass impeller depending on the exact model. The mechnical seal comes in either carbon of ceramic, and the ejetor and nozzle are PPE+PS reinforced with fibreglass.

The AGA-AGC seriesis great for domestic pressure boosting, small-scale garden irrigation, washing vehicles and moving clean water in general.

For more information, refer to the pdf below.

AGA-AGC
Self-priming
SELF-PRIMING ELECTRIC PUMPS in cast ironAPPLICATION
• Domestic pressure boosting
• Small-scale garden irrigation
• Washing vehicles
• Moving clean water in general

TECHNICAL DETAILS
• AGA 0.60 – 0.75 also available in “G” versions i.e. GARDEN (with handle, standard socket and 1.5 m cable) and “GI” (with handle,standard socket and 1.5 m cable and switch)
• Available with brass impeller (AGA 0.60 M GO, AGA 0.75 M GO,AGA 1.00 M GO)

PUMP TECHNICAL DATA
• Maximum working pressure: – 6 bar for AGA 0.60-0.75-1.00 – 10 bar for the rest of the range
• Maximum temperature of the liquid: 45°C
• Maximum suction depth: 8 m
• G1 sution connection for AGA 0.60-0.75-1.00, G1 ½ for the rest of the range
• G1 discharge connection

MOTOR TECHNICAL DATA
• High efficiency motors IE2 starting from 0,75kW
• Self-ventilated 2 poles asynchronous motor
• Class of insulation F
• IP44 Protection degree
• 230V±10%, 50Hz single phase voltage, 230/400V ±10%, 50Hz three phase voltage
• Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
• Protection under user’s responsibility for the three phase version

MATERIAL
• Cast iron pump casing
• Seal housing disc in AISI 304 for AGA 0.60-0.75-1.00, in cast iron integrated in motor bracket for the rest of the range
• Shaft in AISI 303 (part in contact with the liquid)
• Impeller in PPE+PS reinforced with fibreglass for AGA 0.60-0.75-1.00, in brass for the rest of the range
• Mechanical seal in Carbon/Ceramic/NBR
• Ejector and nozzle in PPE+PS reinforced with fibreglass